What Is a Picosecond Laser? The Three Modes and How It Differs from Other Lasers
A picosecond laser is a device that breaks pigment apart using pulses lasting one trillionth of a second. We organize the targets and number of sessions for Spot, Toning, and Fractional modes in a table, and cover the four reasons people feel it "doesn't work," as well as how it differs from other lasers.

[Key points of this article]
A picosecond laser is a laser device that delivers light over an extremely short period — one trillionth of a second — to break pigment into fine particles.
A distinguishing feature is that the way the energy is delivered can be changed, and it is used for three different purposes: dark pigmented spots, melasma and dullness, and pores and acne scars.
The timing at which change is noticed differs by mode; as a guide, dark spots take 1–2 sessions, and melasma or dullness takes 5–10 sessions.
Behind the feeling that it "doesn't work" there are four reasons: a mismatch with the indication, too few sessions, insufficient sun protection, and judging the result too early.
There are risks of redness, scabbing, and pigmentation, and rarely of hypopigmented spots or burns. Please check the treatment booking page for costs.
*This is self-pay treatment not covered by Japanese public health insurance. *Results vary from person to person. *Risks and side effects: redness, stinging, scabbing, and pigmentation may occur at the treated area.
When you consult us about skin concerns in Shinjuku as well, at our clinic we provide guidance after confirming the target and its depth during the examination.
What is a picosecond laser?
A picosecond laser is a device whose laser emission time is measured in "picoseconds." A picosecond is one trillionth of a second, making the emission time far shorter than that of nanosecond-based devices that have been used for pigmented spot treatment.
The shorter the emission time, the more energy reaches the pigment before heat spreads to the surrounding tissue. As a result, the action centers on breaking up pigment through impact rather than through heat, which may allow pigment to be broken into fine particles while limiting the burden on the surrounding skin.
The fragmented pigment is taken up by cells involved in immune function and is eliminated over time. The color does not disappear on the spot at the time of treatment; rather, it fades over several weeks to several months.
About the handling of the devices
There are multiple picosecond laser devices, some approved in Japan and some not. Devices without approval are obtained through personal importation at the physician's discretion.
When a non-approved device is used, the case may not be eligible for the public relief system for adverse health effects. Please confirm in advance the name of the device used and its approval status.
The three delivery modes of the picosecond laser and how they are used
A feature of this device is that the way energy is delivered can be changed with a single unit. It is divided into the following three modes depending on the purpose.
Pico Spot — A method of applying strong energy as a point to each dark spot individually. It targets clearly demarcated solar lentigines and freckles.
Pico Toning — A method of applying weak energy broadly across the entire face. It is used in multiple repeated sessions for melasma, light dullness, and uneven tone.
Pico Fractional — A method of creating microscopic points of action within the skin. Rather than color, it targets enlarged pores, the unevenness of acne scars, and skin texture.
Item | Pico Spot | Pico Toning | Pico Fractional |
|---|---|---|---|
Main targets | Clearly demarcated dark spots and freckles | Melasma, dullness, uneven tone | Pores, acne scars, skin quality |
Delivery method | Point-by-point delivery | Weak delivery over the entire face | Creates point actions across the entire face |
Guide to number of sessions | 1–2 sessions | 5–10 sessions at 2–4 week intervals | 3–5 sessions at monthly intervals |
Downtime | Scabbing and tape protection for several days to 1 week | Redness immediately afterward for a few hours | Redness and roughness for several days |
Applying strong energy as a point to melasma can make the color darker due to the stimulation. Since the same device can produce the opposite result if the wrong mode is used, it is important to identify the target before choosing.

When do the effects of a picosecond laser appear? Timing by mode
The timing at which results are noticed varies greatly by mode. In short, dark spots respond earliest, while skin texture takes the longest.
Course after Pico Spot
Immediately after treatment the color looks darker, a scab forms within a few days, and it comes off naturally around one week. After that, the color may return around 2–4 weeks, and it settles over 3–6 months.
Accordingly, the result is generally assessed about 3 months after treatment. While a marked change often occurs within 1–2 sessions, judging during the period when the color returns can easily lead to the misunderstanding that it "got darker."
Course after Pico Toning
The change per session is gradual. Many people notice a change in brightness from the third session onward, with 5–10 sessions at 2–4 week intervals carried out as one course.
Melasma is a condition that fluctuates easily with stimulation. This method is premised on layering weak energy little by little, and a plan combining topical or oral medication may be considered.
Course after Pico Fractional
For several days after treatment, redness and roughness appear, and the skin surface becomes smoother over 1–2 weeks. Changes to unevenness and pores take time because they involve a process of skin remodeling.
A common approach is to repeat 3–5 sessions at monthly intervals and then review the results. Because the change per session is small, keeping photographs makes comparison easier.
Differences between the picosecond laser and other laser treatments
There are several methods for treating pigmented spots and skin quality, and they differ in how energy is delivered and in which targets they handle best.
Item | Picosecond laser | Q-switched laser | Photofacial (IPL) |
|---|---|---|---|
Unit of emission time | Picoseconds | Nanoseconds | Milliseconds (light applied broadly) |
Main action | Breaks pigment into fine particles by impact | Destroys pigment with heat and impact | Applies a broad range of wavelengths over the whole area |
Best-suited targets | From dark spots to melasma and skin quality | Clearly demarcated dark spots | Light spots, redness, pores |
Downtime | A few hours to 1 week depending on the mode | Scabbing and tape protection for 1–2 weeks | Redness immediately afterward for a few hours |
Guide to number of sessions | 1–10 sessions depending on the target | Mainly a single session | Around 5 sessions at 3–4 week intervals |
Cost | Please check the treatment booking page | Please check the treatment booking page | Please check the treatment booking page |
The basic approach to selection is: point delivery if you want to address a dark spot in a single session; layering weak energy if you want to even out overall tone including melasma; and photofacial if you want to address light spots and redness together.
When several concerns are mixed together, a plan combining treatments at different times may be considered. Rather than choosing by device name, whether a method suited to the target and its depth can be chosen is what determines the result.
Four reasons people feel it "doesn't work"
When little change is noticed after treatment, one of the following often applies.
The target and the method do not match — For example, strong output applied to melasma, or a superficial setting applied to deeper pigment. Even when the appearance is similar, the required settings change with the depth of the pigment.
Not enough sessions, and intervals that are not long enough — As a guide, melasma and dullness require 5–10 sessions and skin quality 3–5 sessions. Judging after 2 sessions means ending the evaluation before the changes have accumulated.
Sun protection and home care are not maintained — Ultraviolet light stimulates the cells that produce pigment. Even if treatment lightens the pigment, it will darken again if sun protection is not continued.
Judging too early — Dark spots change over 3 months after treatment, and skin quality over several months. Judging during the period when the color returns makes it easy to conclude that there is no effect.
If you notice no change, it is important to review the identification of the target rather than continuing the same treatment. Another method may be considered.
Cases suited to the picosecond laser and cases where treatment is not suitable
Cases often considered
You are bothered by clearly demarcated dark spots or freckles
You want to even out the tone of the whole face, including melasma
You also want to address enlarged pores and the unevenness of acne scars
You want to keep the period of tape protection short
You want to address multiple concerns step by step with one device
Cases where treatment is not suitable or requires careful consideration
Those who are pregnant or breastfeeding
Those with a strong suntan on the area to be treated
Those with photosensitivity, or who are taking medication that reacts to light
Those with a keloid-prone constitution
Those with inflammation or infection at the treatment site
Those whose condition looks like a pigmented spot but may be a different skin condition
A state in which pores appear vertically stretched due to sagging is a case where the expected result is unlikely to appear even if the skin surface is smoothed. Since decisions are based on examination, please tell us in advance about any medications you are taking and treatments you have received in the past.
Downtime after a picosecond laser
The course differs by mode. The general guide is as follows.
Point delivery: scabbing and protective tape for several days to 1 week; the period when the color returns is 2–4 weeks
Weak delivery over the entire face: redness for a few hours; makeup is generally considered possible from the same day
Creating points of action within the skin: redness and roughness for several days
Please observe the following points after treatment.
Do not remove the protective tape on your own; keep it applied for the instructed period
Do not force scabs off
Use sunscreen every day and also use a hat or parasol
Do not rub or wash the skin vigorously
Avoid long baths, saunas, and vigorous exercise on the day of treatment
Removing a scab early exposes the skin to stimulation before it has recovered, which can contribute to residual discoloration.
Disadvantages, risks, and side effects of the picosecond laser
Redness and stinging — A temporary reaction to the energy delivered. It generally settles within a few hours to a few days.
Scabbing and peeling — These form as the skin reacts at points where energy was applied. Forcibly removing them can contribute to residual discoloration.
Purpura (pinpoint bruising) — Occurs when fine blood vessels in the superficial skin react. It fades over a number of days.
Pigmentation — Occurs when inflammation from the treatment temporarily activates the cells that produce pigment. Continuing sun protection and topical treatment is the main approach.
Hypopigmentation (loss of color) — When strong energy is applied repeatedly, the cells that produce pigment may decrease, leaving white patches. Because this is difficult to reverse, adjusting the output is important.
Burns and scarring — These occur when strong heat is applied to the skin due to the output level or overlapping passes. If severe pain or blistering occurs, please contact us rather than waiting to see how it develops on your own.
Worsening of melasma — Applying strong output to melasma can make the color darker due to the stimulation.
In addition, it should be kept in mind that depending on the target, multiple visits may be required, and that even if pigment is lightened by treatment, new spots can form with ultraviolet exposure.
Frequently asked questions about the picosecond laser
How soon can results be noticed?
Dark spots may change within 1–2 sessions, but the result is assessed about 3 months later. For melasma and dullness, change appears from the third session onward, and for pores and acne scars it appears over several months. The timing differs depending on the target.

Is it painful?
With point delivery, you may feel a pain like being snapped with a rubber band. With weak delivery over the entire face, the sensation is mainly warmth and a prickling feeling. Numbing cream may be used together as needed.
How long is the downtime?
With weak delivery over the entire face, redness lasts a few hours, and makeup is generally considered possible from the same day. Areas treated point by point are covered with protective tape for several days to about 1 week. Please allow extra time before important events.
How many sessions are needed?
As a guide, dark spots take 1–2 sessions, melasma and dullness 5–10 sessions, and pores and acne scars 3–5 sessions. When there are multiple targets, a plan combining modes and proceeding step by step can be made.
Summary
A picosecond laser is a device that breaks pigment into fine particles using the short emission time of a picosecond. Three approaches — point delivery, weak delivery over the entire face, and creating points of action within the skin — are used selectively depending on the target.
The timing at which change is noticed differs by mode; as a guide, dark spots take 1–2 sessions, melasma and dullness 5–10 sessions, and pores and acne scars 3–5 sessions. If little change is felt, it is important to review the four reasons: a mismatch with the indication, too few sessions, insufficient sun protection, and judging too early.
In addition to redness and pigmentation, there are rare risks of hypopigmented spots and burns. Please first confirm during an examination which target your concern falls under before deciding. Please check the treatment booking page for costs.
References and sources
Ministry of Health, Labour and Welfare, "Medical Advertising Guidelines"
Handling information for the devices used (please confirm details at the time of examination)
*This is self-pay treatment not covered by Japanese public health insurance. *Results vary from person to person. *Side effects and risks: redness, stinging, scabbing, peeling, and purpura at the treated area, pigmentation, and rarely hypopigmented spots, burns, or scarring may occur. If strong output is used on melasma, the color may darken. *As a guide for the standard treatment period and number of sessions: point delivery to dark spots is 1–2 sessions; whole-face delivery for melasma and dullness is 5–10 sessions at 2–4 week intervals; and when the aim is skin quality, 3–5 sessions at monthly intervals, after which continuation depends on the condition. Side effects and the procurement route when non-approved devices are used must be confirmed in advance. Fees vary with timing, campaigns, and contract conditions, so please check the treatment booking page and campaign page.
Supervised by: Dr. Rina Shindo, Director (Cosmetic Dermatology)
Graduated from Shiga University of Medical Science, Faculty of Medicine, Department of Medicine
2019 Sumitomo Hospital (General Incorporated Foundation)
2021 Department of Dermatology, Kobe University Hospital
2022 Chief at a major cosmetic surgery clinic
2025 Director, PGC CLINIC SHINJUKU
Your next step, at your own pace.
Explore the official website for pricing and appointment information.
Pricing & booking