What is the "aristocrat filler" (nasal base filler)? Its effects and how it differs from nasolabial fold hyaluronic acid
The aristocrat filler is an injection that supports the base of the nostrils, and what changes are the shadow beside the nose and the three-dimensional contour around the mouth. Here we summarize the typical volume guide of 0.5–1 cc for both sides combined, the difference from injecting directly into the nasolabial folds, and three points to check before considering treatment.

[Key points of this article]
The aristocrat filler is an injection in which hyaluronic acid is placed into the hollow at the base of the nostrils (the alar base) to support the area from its foundation. It is not injected into the nasolabial fold itself.
What tends to change is the shadow that falls from the side of the nose toward the mouth, and the three-dimensional contour around the mouth. The change can be seen immediately after injection.
When sagging or excess skin is the main contributing factor, this is a case in which the expected result is less likely to appear.
The guideline injection volume is roughly 0.5–1 cc in total for both sides. More volume is not necessarily better; the position and layer in which it is placed have more influence on the result.
Because the alar base is close to large blood vessels, there are risks such as bruising and, rarely, vascular occlusion. Please check the treatment booking page for fees.
*This is self-pay treatment not covered by Japanese public health insurance. *Results vary from person to person. *Risks and side effects: swelling, bruising, pain, asymmetry, and lumps may occur at the injection site.
When you consult us in Shinjuku about concerns around the mouth, at our clinic we provide guidance after examining the shape of the bone and the depth of the hollow during consultation.
What is the aristocrat filler?
The aristocrat filler is a treatment in which a hyaluronic acid product is injected into the "alar base," the area at the base of the nostrils. The aim is to support, from the inside, the hollow around the area where the nasolabial fold begins beside the nose.
The layer of injection is basically a deep layer close to the surface of the bone, rather than just beneath the skin. In this area the distance between skin and bone is short, so injecting into a shallow layer makes irregularities more likely to show on the surface. For this reason, a design that places a small amount deeply and supports the area as a plane is generally chosen.
The products used are mainly firmer ones that hold their shape. There are methods using a needle and methods using a blunt-tipped cannula, and a cannula may be chosen from the standpoint of more easily avoiding blood vessels. Since the alar base lies in a region where vessels running toward the nose and mouth converge, which instrument is used and at what depth the product is placed relate to both the result and safety.
Why the alar base becomes hollow
Hollowing of the alar base arises not from a problem with the skin but from changes in the underlying foundation.
Changes in bone — The bone from around the nostrils to the upper jaw may gradually change in shape with age. When the foundation recedes, its ability to support the overlying skin and fat decreases.
Loss of fat — As the fat around the mouth area thins, the outline of the hollow becomes more defined.
Inherent bone structure — In people whose upper jaw projects forward only modestly, the hollow may be noticeable from a young age.
In other words, when the cause of the hollow lies in bone structure, it appears regardless of age. A situation of "being young yet bothered by nasolabial folds" may involve the shape of the foundation rather than sagging.
Origin of the name and alternative terms
The term "aristocrat filler" is a cosmetic nickname derived from the fact that a raised contour in this area makes the profile look more three-dimensional. It is not a medical term, and some clinics present it as "alar base hyaluronic acid" or "alar base augmentation."
Because the same treatment goes by different names, it is important during counseling to confirm, by anatomical site name, exactly where the product will be injected.
About the handling of injectable products
Hyaluronic acid products include those approved in Japan and those that are not approved. Unapproved products are obtained through personal importation at the physician's discretion. In addition, an approved product may be used for sites other than those for which it was approved (off-label use).
When an unapproved product is used, the public relief system for adverse health effects does not apply. Please confirm before treatment which product will be used and into which layer it will be placed.
Effects and what can be expected from the aristocrat filler
What can be expected is a change in shadowing produced by supporting the foundation, and three-dimensional contour when viewed from the side. It is not a treatment that fills in the nasolabial wrinkle itself.
What tends to change
The shadow beginning beside the nose becomes shallower, and shading caused by the hollow becomes less noticeable
The mouth area is supported forward, changing the three-dimensional contour seen from the side
The base of the nostrils is lifted, and the transition from the base of the nose to the mouth area becomes smoother
The position of the upper lip becomes more stable, changing the impression of the mouth area
The border with the cheek when smiling becomes more gradual
The shadow beside the nose appears as a combination of not only the depth of the wrinkle but also shading caused by the hollow. When the foundation is supported, the shaded portion becomes shallower, so the impression changes even without injecting directly into the wrinkle.

What tends not to change, and the limits
On the other hand, this treatment cannot address conditions such as the following.
Deep grooves in the lower part of the nasolabial fold, near the corner of the mouth
Heaviness around the mouth caused by descent of cheek fat
Wrinkles that have become set as creases due to excess skin
The impression of downturned mouth corners itself
There is a limit to how much the hollow can be supported. When sagging or excess skin is the main contributing factor, adding volume alone increases weight, making it a case in which the expected result is less likely to appear. In such cases, a thread lift or surgical approaches are considered alongside.
When the effect is noticeable
The supported change can be seen immediately after injection. However, swelling is mixed in from the day of treatment through a few days afterward, so the area may look fuller than the actual final result.
Around 1–2 weeks, when swelling settles, is the guideline point for checking the result. After about another month, the product integrates with the surrounding tissue and the feel to the touch also settles. It is important to wait until this period before deciding on additional injection or adjustment.
Differences between the aristocrat filler and nasolabial fold hyaluronic acid
As an approach to the same concern, there is injection placed directly into the nasolabial fold. Because the site addressed differs, the nature of the result also differs.
Item | Aristocrat filler | Direct injection into the nasolabial fold | Botox |
|---|---|---|---|
Injection site | Base of the nostrils (layer close to the bone surface) | Directly beneath the nasolabial groove | Muscles around the mouth |
How it works | Supports from the foundation and makes the shadow shallower | Lifts the groove itself from the inside | Reduces muscle movement |
Area it suits best | Upper part of the nasolabial fold and three-dimensional contour around the mouth | Middle to lower part of the nasolabial fold | Lines that appear with facial movement |
Nature of the result | The overall connection of the contours changes | The groove becomes shallower at a pinpoint location | Movement is softened |
Guideline duration | About 1–2 years | About 6 months to 1 year | About 3–4 months |
Main cautions | With too much volume, the nostrils may look wider | In shallow layers, irregularities are more likely to appear | Difficulty moving the mouth area |
Fees | Please check the treatment booking page | Please check the treatment booking page | Please check the treatment booking page |
The basic way of choosing is: the alar base when the upper part of the nasolabial fold stands out as a shadow, and direct injection when the groove from the middle to the lower part is deep. When both are involved, the order of first supporting the foundation and then evaluating the remaining groove may be taken.
For lines related to movement of the muscles around the mouth, Botox may be considered. Since what each approach addresses differs, it is important to sort out which method suits you during consultation before deciding.
Three things to check before considering the aristocrat filler
There are three points you will want to confirm during counseling.
Which is the main contributing factor, hollowing or sagging? — In front of a mirror, try gently lifting the skin around your mouth upward. If the shadow disappears, sagging is largely involved; if the shadow remains, hollowing is likely to be largely involved.
Into which layer, and with what firmness of product, will it be injected? — The alar base is a site where injection is placed into a deep layer. It is important to have the firmness of the product used and the layer of injection explained to you before treatment.
Are means of correction available? — Hyaluronic acid can in some cases be adjusted with a dissolving agent. Please confirm in advance what will be done if the result differs from what was anticipated.
If these three points are sorted out, you can avoid judging on volume alone. Preparing photographs not only from the front but also from an oblique and side view makes it easier to share your concerns.
Injection volume and approach to design for the aristocrat filler
The guideline injection volume is roughly 0.3–0.5 cc per side, and about 0.5–1 cc in total for both sides. Within the face, this is an area where a small amount tends to produce a change.
Injection volume (both sides combined) | Guideline for the result |
|---|---|
Around 0.5 cc | Modestly supports a shallow hollow. For those who want to keep change subtle |
Around 1 cc | Firmly supports the hollow. A standard amount |
1.5 cc or more | For deep hollows due to bone structure. Care is needed regarding widening of the nostrils |
Increasing the volume strengthens the support, but the following changes also become more likely.
The nostrils are pushed outward, making the width of the nose look wider
The area beneath the nose becomes raised, giving the impression that the mouth area protrudes forward
A sense of unnaturalness in movement when smiling
For this reason, what determines the result is not volume itself so much as the position and layer of injection and the left–right balance. The depth of the hollow often differs between the two sides, and injecting the same amount evenly will leave that difference.
An approach of injecting modestly the first time and adding more after seeing the condition 1–2 weeks later is also chosen. Whether to complete the result in one session or to divide it into adjustments should be discussed taking into account the depth of the hollow and the degree of change you wish for.
Duration of the aristocrat filler
The guideline duration is about 1–2 years. It varies depending on the type of product and the layer into which it was injected.
Softer product injected into a shallower layer: around 1 year
Firmer product injected into a deep layer close to the bone surface: about 1.5–2 years
The alar base tends to hold longer because it is an area with less movement compared with the mouth corners or lips. The more an area moves repeatedly with facial expression, the more quickly the product tends to break down.
The speed of absorption varies from person to person. If you wish to maintain the condition, a plan of adding more before it is fully absorbed is generally made. Because this area supports the foundation, when the hollow returns the shadow returns as well.
In addition, even with the same amount injected, how long it seems to last varies with bone structure and the depth of the hollow. If a modest amount is injected into a deep hollow, the support is weaker, so it may feel as though it has reverted sooner.
Cases suited to the aristocrat filler and cases for which the treatment is not suitable
Cases in which it is often considered
You are bothered by the shadow beside the nose, at the upper part of the nasolabial fold
The start of the nasolabial fold has been noticeable from a young age
The mouth area looks flat when seen from the side
The shadow remains even when you lift the skin
It is difficult to allow for a long downtime

Cases for which the treatment is not suitable or requires careful consideration
Those in whom skin sagging has advanced considerably and excess skin is the main contributing factor
Those whose main concern is a deep groove in the lower part of the nasolabial fold
Those whose nostrils are naturally wide and who wish to avoid widening to the sides
Those who have had an allergic reaction to hyaluronic acid or anesthetic ingredients
Those with inflammation or infection at the site to be injected
Those who are pregnant or breastfeeding
Those taking medication that makes blood less likely to clot, or who have an autoimmune disease
In people whose bone structure has a forward-projecting upper jaw, injecting volume into the alar base may strengthen the impression that the mouth area protrudes forward. Since decisions are based on examination, please inform us in advance of your medical history, medications you are taking, and any injections you have received in the past.
Downtime with the aristocrat filler
The impact on daily life is generally minor. The guideline course is as follows.
Swelling / a fuller feeling: about 2 days to 1 week
Redness: a few hours to about 1 day
Bruising: if it occurs, about 1–2 weeks
Pain on pressing: a few days
A strange sensation when smiling: a few days
Firmness to the touch: integrates over about 1 month
Because the alar base lies at a position involved in movement of the mouth area, for several days after injection you may feel a catching sensation when you smile. This occurs because pressure is applied to the movement by the injected product, and it settles as the product integrates.
Makeup is generally considered possible from the same day. However, please observe the following points as precautions from the day of treatment through several days afterward.
Do not rub or press the injected area forcefully
Avoid long baths, saunas, and vigorous exercise
Refrain from drinking alcohol
Do not press strongly on the sides of the nostrils with mask straps
Do not press your face down while lying prone
Increased blood flow is a factor in more pronounced swelling and bruising. If strong force is applied before the product integrates, the shape may change.
Disadvantages, risks, and side effects of the aristocrat filler
Swelling and bruising — These arise from the tissue reaction to the passage of a needle or cannula and from injury to small blood vessels. The area around the nose has many vessels and is prone to bruising.
Asymmetry — Because there are inherent differences in bone shape and depth of hollow, the result may not match on both sides. This is checked around 1–2 weeks, and additional adjustment may be considered.
Lumps and irregularities — These occur when the product clumps in one spot or when it is placed in a shallow layer. Since the skin here is thin, they are easy to feel, and in some cases they can be addressed with an agent that dissolves hyaluronic acid.
Widening of the nostrils and forward protrusion of the mouth area — These occur when the volume is excessive. It is important to decide the amount while considering the balance of the whole face.
A strange sensation when smiling — Because the product is placed at a position involved in movement of the mouth area, facial movement may feel changed.
Impaired blood flow due to vascular occlusion — Rarely, if the product enters a blood vessel, blood flow may be obstructed. Vessels running toward the nose and eyes pass near the alar base, and impaired skin blood flow and effects on vision have been reported. If sudden severe pain, a change in skin color, or difficulty seeing occurs, it is important to contact us immediately.
Infection and delayed inflammation — Bacteria may enter the injection site, or a reaction may appear months later as a firm swelling. It may also appear during a period when you are in poor health.
In addition, since the product is absorbed over time, it is also important to understand that maintaining the condition presupposes repeat treatment.
Frequently asked questions about the aristocrat filler
Does it hurt?
There is pain when the needle or cannula is inserted, and a sensation of pressure as the product spreads. Methods such as applying anesthetic cream or using a product containing a pain-reducing ingredient are employed. Because the alar base is close to the bone, you may feel a resonating sensation.
How long does the effect last?
About 1–2 years is the guideline. It lasts longer when a firmer product is placed in a deep layer, and is shorter with a softer product. Because the shadow returns when the hollow returns, if you wish to maintain the condition, additional injection before it is fully absorbed may be considered.
How noticeable are swelling and bruising?
Swelling is about 2 days to 1 week, and if bruising occurs, about 1–2 weeks is the guideline. Since the side of the nose is a hard place to conceal, if you have an important engagement, please book with about 2 weeks of leeway.
Will the nasolabial folds disappear?
The shadow at the upper part of the nasolabial fold becomes shallower, but the groove itself does not disappear. In particular, deep grooves near the corner of the mouth cannot be addressed, so other methods are considered alongside.
How much does it cost?
It varies depending on the type of product used and the volume injected. Pricing is often set per syringe, and the total changes with the amount used. Because the price also varies with the time of year and contract conditions, please check the treatment booking page.
Summary
The aristocrat filler is a treatment in which hyaluronic acid is placed into the hollow at the base of the nostrils to support the area from its foundation. The position differs from that of direct injection into the nasolabial fold, and what tends to change is the shadow beside the nose and the three-dimensional contour around the mouth.
The injection volume is about 0.5–1 cc in total for both sides, and the guideline duration is about 1–2 years. More volume is not necessarily better; the position and layer of injection and the left–right balance determine the result. When sagging or excess skin is the main contributing factor, treatments in a different direction are considered.
In addition to bruising and asymmetry, there is also a rare risk such as vascular occlusion. Please decide after sorting out, through examination, whether the shadow around your mouth is due to hollowing or to sagging. Please check the treatment booking page for fees.
References and sources
Ministry of Health, Labour and Welfare, "Medical Advertising Guidelines"
Handling information for the products used (please confirm details at the time of consultation)
*This is self-pay treatment not covered by Japanese public health insurance. *Results vary from person to person. *Side effects and risks: swelling, bruising, pain, puffiness, asymmetry, lumps or irregularities at the injected site, widening of the nostrils, a strange sensation when smiling, and rarely impaired blood flow due to vascular occlusion, infection, or allergic reaction may occur. *As for the standard treatment period and number of sessions, the guideline is approximately 1–2 years per injection, and additional or repeat injection is considered according to your condition. Side effects and, when unapproved products are used, the route of procurement and other matters require confirmation in advance. Fees vary with the time of year, campaigns, and contract conditions, so please check the treatment booking page and campaign page.
Supervised by: Rina Shindo, Director (Cosmetic Dermatology)
Graduated from Shiga University of Medical Science, Faculty of Medicine, School of Medicine
2019: Sumitomo Hospital (General Incorporated Foundation)
2021: Department of Dermatology, Kobe University Hospital
2022: Chief at a major cosmetic surgery clinic
2025: Director, PGC CLINIC SHINJUKU
Your next step, at your own pace.
Explore the official website for pricing and appointment information.
Pricing & booking